|
|
Table 1. Cisco Video Surveillance 2600 IP Camera Features
|
Item |
Specification |
|
Imaging Device |
1/3-in. progressive-scan CMOSsensor with wide dynamic range |
|
Image Control |
Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto/manual iris |
|
Dynamic Range |
102 dBtypical/120 dB maximum |
|
Minimum Illumination |
• Color mode: F1.4 @ 0.65 lux
• Black and white mode: F1.4 @ 0.08 lux |
|
Signal-to-Noise Ratio (SNR) |
>48 dB |
|
Lens Selection |
Accepts manual or DC auto iris lens |
|
Lens Mount |
CS mount |
|
Shutter Speed |
Electronic Shutter |
|
Video Compression |
H.264, MPEG-4, MJPEG |
|
Audio Compression* |
G.711 A-Law, G.711 U-Law, G.726 |
|
Resolution and Frame Rate |
NTSC/PAL
• 720 x 480/576 @ 30/25 fps (D1)
• 704 x 480/576 @ 30/25 fps (4CIF)
• 352 x 240/288 @ 30/25 fps (CIF) |
|
Video Streaming |
Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details. |
|
Protocols |
Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP) |
|
Quality of Service (QoS) |
Differentiated services code point (DSCP) marking |
|
Power |
12 VDC
PoE (802.3af) @ 48V/0.3A |
|
Power Consumption |
11W (max) |
Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Table 2 lists supported single stream configurations on the Cisco Video Surveillance 2600 IP Camera.
Table 2. Supported Single Stream Configurations
|
Single Streaming |
Maximum Resolution and Frames Per Second (FPS) |
Resolutions Supported
(NTSC & PAL) |
NTSC
FPS Supported |
PAL FPS Supported |
|
H.264 |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MPEG-4 |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MJPEG |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
Table 3 lists the supported primary and secondary video stream combinations on the Cisco Video Surveillance 2600 IP Camera.
Table 3. Supported Primary and Secondary Video Stream Combinations
|
Primary |
Secondary |
|
H.264 |
H.264 |
|
H.264 |
MJPEG |
|
MPEG4 |
MPEG4 |
|
MPEG4 |
MJPEG |
Table 4 lists the supported primary and secondary video streams on the Cisco Video Surveillance 2600 IP Camera.
Table 4. Cisco Video Surveillance 2600 IP Camera Video Stream Support
|
NTSC Primary
Channel Resolutions |
NTSC Primary Frame Rate |
NTSC Secondary
Channel Resolutions |
NTSC Secondary Frame Rate* |
|
4 CIF, CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
|
PAL Primary
Channel Resolutions |
PAL Primary Frame Rate |
PAL Secondary
Channel Resolutions |
PAL Secondary Frame Rate* |
|
4 CIF, CIF |
25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Connectors
Table 5 describes the connectors on the Cisco Video Surveillance 2600 IP Camera.
Table 5. Cisco Video Surveillance 2600 IP Camera Connectors
|
Item |
Specification |
|
Network connectivity |
10/100 BASE-TX Ethernet with RJ-45 connector |
|
Video |
1 analog output BNC connector, 75 ohms |
|
Audio* |
• 1, 3.5-mm output jack for optional external speaker
• 1, 3.5-mm input jack for optional external microphone
• Built-in microphone
• Two-way (full- and half-duplex), one-way, or audio off |
|
Serial port |
RS-485 (2-wire), Pelco D protocol only |
|
Alarm input |
2, logic-level programmable |
|
Alarm output* |
2, logic-level programmable |
|
Power input |
2-pin terminal |
Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Software
Table 6 describes the primary features of the Cisco Video Surveillance 2600 IP Camera software.
Table 6. Cisco Video Surveillance 2600 IP Camera Primary Software Features
|
Item |
Specification |
|
Video Format |
NTSC and PAL |
|
Day/night Settings |
Auto or manual day/night operation with user-definable thresholds |
|
Image Settings |
Configurable brightness, sharpness, saturation, and white balance |
|
Overlay Capabilities |
Time, date, and text |
|
Selectable Bit Rate |
Support for Constant Bit Rate or Variable Bit Rate |
|
IP Filtering |
Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings |
|
Discovery* |
Cisco Discovery Protocol, Bonjour zero-configuration discovery |
|
Configuration |
• Browser-based using Internet Explorer 8
• Multiple user access levels with password protection |
|
Activity Detection |
4 user-definable motion detection areas |
|
Event Actions |
• Email
• FTP upload of captured video or JPEG snapshot depending on stream configuration
• HTTP alert
• Alarm output |
Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Specifications
Table 7 provides specifications of the Cisco Video Surveillance 2600 IP Camera.
Table 7. Cisco Video Surveillance 2600 IP Camera Specifications
|
Item |
Specification |
|
Housing |
Aluminum |
|
LEDs |
Power, Ethernet link, and activity |
|
Dimensions
(L x W x H) |
• 4.96 x 3.15 x 2 in.
• 126 x 80 x 50 mm |
|
Weight |
• 1.15 lb
• 0.52 kg |
|
Certifications |
Safety:
IEC 60950-1:2001
EN 60950-2:2001 +A11:2004 |
EMC-Emissions:
FCC Part 12 Subpart B, Class B
CISPR22 Class B
ICES-003, Class B
ANSI C63.4
EN55022: Class B
EN61000-3-2
EN61000-3-3 |
EMC-Immunity:
EN55024
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11 |
|
Operating Temperature |
• 32 to 122°F
• 0 to 50°C |
Table 8. Package Contents
|
Item |
|
Cisco Video Surveillance 2600 Series IP Camera |
|
Lens opening dust cap, mounting hole protector, terminal block for power connection, C mount lens adaptor, 0.9-mm Allen wrench, snap-on ferrite core (x2). |
|
Regulatory compliance and safety information |
|
Quick start guide |
Availability
The Cisco Video Surveillance 2600 IP Camera is available through Cisco Authorized Technology Provider (ATP) Partners.
Ordering Information
Table 9 lists the part numbers for the Cisco Video Surveillance 2600 IP Camera and for the lenses that the camera supports.
Table 9. Ordering Information
|
Part Number |
Description |
|
CIVS-IPC-2600 |
Cisco Video Surveillance 2600 IP Camera, Full Resolution, Day/Night |
|
Lenses |
|
CIVS-IPC-VT38 |
Cisco IP Camera Tamron 3-8 mm Varifocal Lens |
|
CIVS-IPC-VT31 |
Cisco IP Camera Tamron 3-11 mm Varifocal Lens |
|
CIVS-IPC-VT55 |
Cisco IP Camera Tamron 5-50 mm Varifocal Lens |
|
CIVS-IPC-VF38 |
Cisco IP Camera Fujinon 3-8 mm Varifocal Lens |
|
CIVS-IPC-VF31 |
Cisco IP Camera Fujinon 3-11 mm Varifocal Lens |
|
CIVS-IPC-VF55 |
Cisco IP Camera Fujinon 5-50 mm Varifocal Lens | |
|
|
.png)
Есть в наличии
