|
|
Table 1. Cisco Video Surveillance 2621V IP Dome Features
|
Item |
Specification |
|
Imaging Device |
1/3-in. progressive-scanRGB CMOSsensor with wide dynamic range |
|
Image Control |
Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto iris |
|
Dynamic Range |
102 dBtypical/120 dB maximum |
|
Minimum Illumination |
• Color mode: F1.4 @ 0.65 lux
• Black and white mode: F1.4 @ 0.08 lux |
|
Signal-to-Noise Ratio (SNR) |
>48 dB |
|
Shutter |
Electronic shutter |
|
Lens |
Motorized DC auto-iris lens with day/night filter
3.3mm-12mm
Zoom: 3.6x
Field of view:
• Horizontal: 24°-90°
• Vertical: 18°-64° |
|
Camera Angle Adjustment |
Pan: 340°
Tilt: 160°
Rotation: 200° |
|
Video Compression |
H.264, MPEG-4, MJPEG |
|
Audio Compression* |
G.711 A-Law, G.711 U-Law, G.726 |
|
Resolution and Frame Rate |
• NTSC/PAL
• 720 x 480/576 @ 30/25 fps (D1)
• 704 x 480/576 @ 30/25 fps (4CIF)
• 352 x 240/288 @ 30/25 fps (CIF) |
|
Video Streaming |
Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details. |
|
Protocols |
Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP), 802.1x |
|
Quality of Service (QoS) |
Differentiated services code point (DSCP) marking |
|
Power |
• 12 VDC or 24 VAC, isolated external power supply
• PoE (802.3af) @ 48V/0.3A |
|
Power Consumption |
11W (maximum) |
* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Table 2 lists supported single stream configurations on the Cisco Video Surveillance 2621V IP Dome.
Table 2. Supported Single Stream Configurations
|
Single Streaming |
Maximum Resolution and Frames Per Second (FPS) |
Resolutions Supported
(NTSC & PAL) |
NTSC
FPS Supported |
PAL FPS Supported |
|
H.264 |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MPEG-4 |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
|
MJPEG |
D1 @ 30 fps |
D1
4CIF
CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
25, 20, 15, 10, 8, 6, 5 |
Table 3 lists the supported primary and secondary video stream combinations on the Cisco Video Surveillance 2621V IP Dome.
Table 3. Supported Primary and Secondary Video Stream Combinations
|
Primary |
Secondary |
|
H.264 |
H.264 |
|
H.264 |
MJPEG |
|
MPEG4 |
MPEG4 |
|
MPEG4 |
MJPEG |
Table 4 lists the supported primary and secondary video streams on the Cisco Video Surveillance 2621V IP Dome.
Table 4. Cisco Video Surveillance 2621V IP Dome Video Stream Support
|
NTSC Primary
Channel Resolutions |
NTSC Primary Frame Rate |
NTSC Secondary
Channel Resolutions |
NTSC Secondary Frame Rate* |
|
4 CIF, CIF |
30, 25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
|
PAL Primary
Channel Resolutions |
PAL Primary Frame Rate |
PAL Secondary
Channel Resolutions |
PAL Secondary Frame Rate* |
|
4 CIF, CIF |
25, 20, 15, 10, 8, 6, 5 |
CIF |
15, 10, 8, 6, 5 |
* If a secondary frame rate is selected in Cisco Video Surveillance Manager that is not listed in the table, the camera will automatically use the closest frame rate.
Connectors
Table 5 describes the connectors on the Cisco Video Surveillance 2621V IP Dome.
Table 5. Cisco Video Surveillance 2621V IP Dome Connectors
|
Item |
Specification |
|
Network Connectivity |
10/100 BASE-TX Ethernet with RJ-45 connector |
|
Video |
3.5-mm service connector, provides analog video (use with optional mini cable with BNC adapter during installation) |
|
Audio* |
• 3.5-mm audio jack: audio input for optional external microphone and audio output for optional external speaker supported through Y-cable adapter
• Two-way (full- and half-duplex), one-way, or audio off |
|
Alarm Input |
Two logic-level programmable inputs |
|
Alarm Output* |
Two logic-level programmable outputs |
|
Power Input |
3-pin terminal |
* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Software
Table 6 describes the primary features of the Cisco Video Surveillance 2611 IP Dome software.
Table 6. Cisco Video Surveillance 2621V IP Dome Primary Software Features
|
Item |
Specification |
|
Video Format |
NTSC and PAL |
|
Day/night Settings |
Auto or manual day/night operation with user-definable thresholds |
|
Image Settings |
Configurable brightness, sharpness, saturation, and white balance |
|
Overlay Capabilities |
Time, date, and text |
|
Selectable Bit Rate |
Support for Constant Bit Rate or Variable Bit Rate |
|
IP Filtering |
Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings |
|
Discovery* |
Cisco Discovery Protocol, Bonjour zero-configuration discovery |
|
Configuration |
• Browser-based using Internet Explorer 8 with SP3
• Multiple user access levels with password protection |
|
Motion Detection |
4 user-definable motion detection areas |
|
Event Actions |
• Email
• FTP upload of captured video or JPEG snapshot depending on stream configuration
• HTTP alert
• Alarm output |
* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Specifications
Table 7 provides specifications of the Cisco Video Surveillance 2621V IP Dome.
Table 7. Cisco Video Surveillance 2621V IP Dome Mechanical Specifications
|
Item |
Specification |
|
Housing |
Metal base and polycarbonate transparent cover with tamper-resistant mounting |
|
LEDs |
Power and Ethernet |
|
Dimensions
(W x H) |
6.10 x 4.64 in.
155 x 118 mm |
|
Weight |
3.1 lb
1.4 kg |
|
Standards Compliance |
Safety:
UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
AS/NZS 60950 |
EMC-Emissions:
47CFR Part 15 (CFR 47) Class B
AS/NZS CISPR22 Class B
CISPR22 Class B
EN55022 Class B
ICES003 Class B
VCCI Class B
EN61000-3-2
EN61000-3-3
KN22 Class B
CNS13438 Class B |
EMC-Immunity:
EN55024
CISPR24
EN50130-4
KN24 |
|
Operating Temperature |
0° to 50°C
32° to 122°F |
Cisco Video Surveillance 2621V IP Dome Ordering Information
|
Part Number |
Description |
|
CIVS-IPC-2621 |
Cisco Video Surveillance Standard-Definition IP Dome, 3.3-12 mm, D/N, smoked, vandal-resistant |
|
Accessories |
|
CIVS-IPCA-1004= |
Dome, Clear, 2500 and 2600 Series |
|
CIVS-IPCA-1005= |
Dome, Smoked, 2500 and 2600 Series |
|
CIVS-IPCA-1006= |
Conduit base with extra gaskets, 2500 and 26xxV Series |
|
CIVS-IPCA-1007= |
Ceiling mount support |
|
CIVS-IPCA-1010= |
Pendant cap, 2500 and 26xxV Series |
|
CIVS-IPCA-1011= |
Wall mount for use with CIVS-IPCA-1010 |
|
CIVS-IPCA-1012= |
Ceiling mount for use with CIVS-IPCA-1010 |
|
CIVS-IPCA-1013= |
Pendant cap adapter (3/4" to 1.5" male NPT thread) |
|
CIVS-IPCA-1014= |
Round pole mount adapter for use with wall mount |
|
CIVS-IPCA-1017= |
Audio/video cables |
|
CIVS-IPCA-1018= |
Sun shield | |
|
|
.png)
Есть в наличии
